Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Položka (položky) are being added to the cart
Zobrazit košík
Frézujte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

KenTIP

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (13)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(13)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(13)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(13)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(13)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(13)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(13)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(13)
    • M Stainless Steel (3)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(3)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(3)
    • K Cast Iron (13)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(13)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(13)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(13)
    • N Non-Ferrous Materials (3)
      • N1
        Wrought Aluminum (3)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(3)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(3)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (3)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (3)
      • N6
        Carbon, Graphite Composites, CFRP (3)
    Cutting Diameter
    Cutting Diameter
    • 0.3125 in(1)
    • 0.315 in(1)
    • 0.3189 in(1)
    • 0.323 in(1)
    • 0.3268 in(1)
    • 0.3307 in(1)
    • 0.3346 in(2)
    • 0.3386 in(2)
    • 0.3438 in(2)
    • 0.3937 in(2)
    • 0.3976 in(2)
    • 0.4016 in(1)
    • 0.404 in(2)
    • 0.4063 in(2)
    • 0.4094 in(2)
    • 0.4724 in(1)
    • 0.4764 in(1)
    • 0.4844 in(1)
    • 0.5512 in(3)
    • 0.5551 in(3)
    • 0.5591 in(1)
    • 0.5625 in(2)
    • 0.563 in(3)
    • 0.5669 in(3)
    • 0.5709 in(1)
    • 0.5827 in(1)
    • 0.5906 in(2)
    • 0.5945 in(2)
    • 0.5984 in(2)
    • 0.6055 in(2)
    • 0.6094 in(2)
    • 0.6142 in(2)
    • 0.622 in(2)
    • 0.6299 in(1)
    • 0.631 in(1)
    • 0.6339 in(1)
    • 0.6417 in(1)
    • 0.6457 in(1)
    • 0.6496 in(1)
    • 0.6535 in(1)
    • 0.6563 in(1)
    • 0.6575 in(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 7.938 mm(1)
    • 8.0 mm(1)
    • 8.1 mm(1)
    • 8.204 mm(1)
    • 8.3 mm(1)
    • 8.4 mm(1)
    • 8.5 mm(2)
    • 8.6 mm(2)
    • 8.733 mm(2)
    • 10.0 mm(2)
    • 10.1 mm(2)
    • 10.2 mm(1)
    • 10.262 mm(2)
    • 10.32 mm(2)
    • 10.4 mm(2)
    • 12.0 mm(1)
    • 12.1 mm(1)
    • 12.304 mm(1)
    • 14.0 mm(3)
    • 14.1 mm(3)
    • 14.2 mm(1)
    • 14.288 mm(2)
    • 14.3 mm(3)
    • 14.4 mm(3)
    • 14.5 mm(1)
    • 14.8 mm(1)
    • 15.0 mm(2)
    • 15.1 mm(2)
    • 15.2 mm(2)
    • 15.38 mm(2)
    • 15.479 mm(2)
    • 15.6 mm(2)
    • 15.8 mm(2)
    • 16.0 mm(1)
    • 16.027 mm(1)
    • 16.1 mm(1)
    • 16.3 mm(1)
    • 16.4 mm(1)
    • 16.5 mm(1)
    • 16.6 mm(1)
    • 16.67 mm(1)
    • 16.7 mm(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 25.5 mm(1)
    • 27.0 mm(1)
    • 31.5 mm(1)
    • 36.0 mm(1)
    • 42.0 mm(1)
    • 43.5 mm(2)
    • 45.0 mm(1)
    • 48.0 mm(2)
    • 50.0 mm(1)
    • 51.0 mm(1)
    • 58.0 mm(1)
    Maximum Hole Depth [L4] MinkomuMaximum Hole Depth [L4] Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 1.0 in(1)
    • 1.06 in(1)
    • 1.24 in(1)
    • 1.42 in(1)
    • 1.65 in(1)
    • 1.71 in(2)
    • 1.77 in(1)
    • 1.89 in(2)
    • 1.9685 in(1)
    • 2.01 in(1)
    • 2.2834 in(1)
    Maximum Hole Depth [L4] MinkomuMaximum Hole Depth [L4] Max
    Reach
    Reach
    • 1.6063 in(1)
    • 1.6929 in(1)
    • 1.9449 in(1)
    • 2.6063 in(2)
    • 2.685 in(1)
    • 2.8504 in(2)
    • 3.0118 in(1)
    Reach MinkomuReach Max
    Reach
    Reach
    • 40.8 mm(1)
    • 43.0 mm(1)
    • 49.4 mm(1)
    • 66.2 mm(2)
    • 68.2 mm(1)
    • 72.4 mm(2)
    • 76.5 mm(1)
    Reach MinkomuReach Max
    Over All Length [L]
    Over All Length [L]
    • 3.1496 in(1)
    • 3.2283 in(1)
    • 3.5827 in(1)
    • 3.7008 in(1)
    • 4.1142 in(1)
    • 4.4488 in(1)
    • 4.6457 in(2)
    • 4.7441 in(1)
    • 4.7638 in(2)
    • 4.8425 in(1)
    • 5.2165 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 80.0 mm(1)
    • 82.0 mm(1)
    • 91.0 mm(1)
    • 94.0 mm(1)
    • 104.5 mm(1)
    • 113.0 mm(1)
    • 118.0 mm(2)
    • 120.5 mm(1)
    • 121.0 mm(2)
    • 123.0 mm(1)
    • 132.5 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC7410 (8)
    • KCP15 (13)
    • KCPM45 (6)
    frontEnd
    Point Angle
    Point Angle
    • 140.0 (13)
    • 180.0 (6)
    Point Angle MinkomuPoint Angle Max
    backEnd
    Back-End Diameter
    Back-End Diameter
    • 8.0 mm(1)
    • 9.0 mm(2)
    • 11.0 mm(2)
    • 13.0 mm(1)
    • 14.0 mm(1)
    • 15.0 mm(4)
    • 16.0 mm(2)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.315 in(1)
    • 0.3543 in(2)
    • 0.4331 in(2)
    • 0.5118 in(1)
    • 0.5512 in(1)
    • 0.5906 in(4)
    • 0.6299 in(2)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    KenTIP
    Systém BF s vrtacími tělesy KenTIP™ BF • Vysoce výkonné kombinované nástroje • 4 x D • Metrické
    (4)

    Systém BF s vrtacími tělesy KenTIP™ BF • Vysoce výkonné kombinované nástroje • 4 x D • Metrické

    Systém BF s vrtacími tělesy KenTIP™ BF • Vysoce výkonné kombinované nástroje • 3 x D • Metrické
    (9)

    Systém BF s vrtacími tělesy KenTIP™ BF • Vysoce výkonné kombinované nástroje • 3 x D • Metrické

    Máte na nás otázky?

    Náš zkušený tým je připraven vám pomoci.

    Vyžádejte si další informace
    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk