Deep-Hole Drilling (up to 10xD) • HTS systems
Filtry
Filtry
Zobrazit filtry v
MetrickéPalcové
Workpiece Material
Workpiece Material
- P Steel (195)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(195)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(195)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(195)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(195)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(195)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(195)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(195)
- M Stainless Steel (199)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(199)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(199)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(199)
- K Cast Iron (213)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(213)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(213)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(213)
- N Non-Ferrous Materials (167)
- N1Wrought Aluminum (167)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(167)
- N3High-Silicon Aluminum Alloys Si >12.2%(163)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (167)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (167)
- N6Carbon, Graphite Composites, CFRP (167)
- N7MMC's (147)
- S High-Temp Alloys (198)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(198)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(198)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(198)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(198)
- H Hardened Materials (109)
- H1Hardened Materials 44-48 HRC(109)
- H2Hardened Materials 48-55 HRC(109)
- H3Hardened Materials 56-60 HRC(109)
- H4Hardened Materials >60 HRC(109)
Applications
Applications
Convex Drilling (1)
Drilling (61)
Cutting Diameter
Cutting Diameter
- 0.1969 in(1)
- 0.2362 in(1)
- 0.315 in(7)
- 0.3937 in(7)
- 0.5906 in(3)
- 0.7874 in(3)
- 0.9843 in(3)
- 1.1811 in(3)
- 1.5748 in(1)
- 1.6929 in(1)
- 1.77 in(1)
- 1.811 in(1)
- 1.9291 in(1)
- 1.97 in(1)
- 2.0472 in(1)
- 2.17 in(1)
- 2.28 in(1)
- 2.48 in(2)
- 2.68 in(1)
- 2.87 in(1)
- 3.07 in(2)
- 3.31 in(1)
- 3.54 in(1)
- 3.78 in(2)
- 4.02 in(1)
- 4.25 in(1)
- 4.53 in(1)
- 4.8 in(1)
- 5.12 in(1)
- 5.51 in(1)
- 5.91 in(1)
- 6.22 in(1)
- 6.38 in(1)
- 7.09 in(1)
- 7.68 in(1)
- 8.39 in(1)
- 9.06 in(1)
- 10.24 in(1)
komu
Cutting Diameter
Cutting Diameter
- 5.0 mm(1)
- 6.0 mm(1)
- 8.0 mm(7)
- 10.0 mm(7)
- 15.0 mm(3)
- 20.0 mm(3)
- 25.0 mm(3)
- 30.0 mm(3)
- 40.0 mm(1)
- 43.0 mm(1)
- 45.0 mm(1)
- 46.0 mm(1)
- 49.0 mm(1)
- 50.0 mm(1)
- 52.0 mm(1)
- 55.0 mm(1)
- 58.0 mm(1)
- 63.0 mm(2)
- 68.0 mm(1)
- 73.0 mm(1)
- 78.0 mm(2)
- 84.0 mm(1)
- 90.0 mm(1)
- 96.0 mm(2)
- 102.0 mm(1)
- 108.0 mm(1)
- 115.0 mm(1)
- 122.0 mm(1)
- 130.0 mm(1)
- 140.0 mm(1)
- 150.0 mm(1)
- 158.0 mm(1)
- 162.0 mm(1)
- 180.0 mm(1)
- 195.0 mm(1)
- 213.0 mm(1)
- 230.0 mm(1)
- 260.0 mm(1)
komu
Cutting Condition Material
Cutting Condition Material
- K1 (95)
- K2 (95)
- K3 (95)
- M1 (111)
- M2 (111)
- M3 (111)
- N1 (69)
- N2 (69)
- N3 (69)
- N4 (69)
- N5 (69)
- N6 (69)
- N7 (69)
- P0 (107)
- P1 (107)
- P2 (107)
- P3 (107)
- P4 (107)
- P5 (107)
- P6 (107)
- S1 (103)
- S2 (103)
- S3 (103)
- S4 (103)
Cutting Condition
Cutting Condition
- Interrupted (95)
- Stable (151)
- Unstable (99)
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 8.0 mm(2)
- 9.6 mm(1)
- 10.0 mm(2)
- 11.3 mm(1)
- 430.0 mm(1)
- 460.0 mm(1)
- 490.0 mm(1)
- 500.0 mm(1)
- 520.0 mm(1)
- 550.0 mm(2)
- 580.0 mm(1)
- 630.0 mm(1)
- 680.0 mm(2)
- 750.0 mm(7)
- 780.0 mm(3)
- 1000.0 mm(5)
- 1060.0 mm(3)
- 1360.0 mm(4)
komu
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 0.315 in(2)
- 0.378 in(1)
- 0.3937 in(2)
- 0.4449 in(1)
- 16.9291 in(1)
- 18.1102 in(1)
- 19.2913 in(1)
- 19.685 in(1)
- 20.4724 in(1)
- 21.6535 in(2)
- 22.8346 in(1)
- 24.8031 in(1)
- 26.7717 in(2)
- 29.5276 in(7)
- 30.7087 in(3)
- 39.3701 in(5)
- 41.7323 in(3)
- 53.5433 in(4)
komu
Reach
Reach
- 0.3701 in(1)
- 0.378 in(1)
- 0.3996 in(2)
- 0.4449 in(2)
- 0.4724 in(2)
- 0.6811 in(1)
- 0.9055 in(1)
- 1.1417 in(1)
- 1.4173 in(1)
komu
Reach
Reach
- 9.4 mm(1)
- 9.6 mm(1)
- 10.15 mm(2)
- 11.3 mm(2)
- 12.0 mm(2)
- 17.3 mm(1)
- 23.0 mm(1)
- 29.0 mm(1)
- 36.0 mm(1)
komu
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- -8888.0 (33)
komu
Connection Style
Connection Style
- HTS (33)
- HTS Pilot Drill Shank (18)
- HTS-C Pilot Drill Shank (4)
- HTS-R Pilot Drill Shank (6)
Number of Flutes
Number of Flutes
- 2 (61)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 2.0 (76)
- 4.0 (24)
komu
Over All Length [L]
Over All Length [L]
- 1.0787 in(1)
- 1.2001 in(1)
- 1.4567 in(1)
- 1.4961 in(1)
- 1.752 in(5)
- 2.0079 in(1)
- 2.1457 in(4)
- 2.2638 in(1)
- 2.7165 in(1)
- 3.3465 in(2)
- 3.7401 in(1)
- 3.937 in(3)
- 4.1338 in(4)
- 4.5276 in(4)
- 4.7244 in(4)
- 5.1181 in(3)
- 5.7087 in(3)
- 6.2992 in(4)
- 7.2835 in(2)
- 7.874 in(1)
- 9.0551 in(2)
komu
Over All Length [L]
Over All Length [L]
- 27.4 mm(1)
- 30.5 mm(1)
- 37.0 mm(1)
- 38.0 mm(1)
- 44.5 mm(5)
- 51.0 mm(1)
- 54.5 mm(4)
- 57.5 mm(1)
- 69.0 mm(1)
- 85.0 mm(2)
- 95.0 mm(1)
- 100.0 mm(3)
- 105.0 mm(4)
- 115.0 mm(4)
- 120.0 mm(4)
- 130.0 mm(3)
- 145.0 mm(3)
- 160.0 mm(4)
- 185.0 mm(2)
- 200.0 mm(1)
- 230.0 mm(2)
komu
Corner Radius
Corner Radius
- 0.008 in(7)
- 0.012 in(5)
- 0.016 in(106)
- 0.024 in(8)
- 0.031 in(101)
- 0.039 in(43)
- 0.047 in(54)
- 0.063 in(45)
- 0.079 in(22)
komu
Corner Radius
Corner Radius
- 0.2 mm(7)
- 0.3 mm(5)
- 0.4 mm(106)
- 0.6 mm(8)
- 0.8 mm(101)
- 1.0 mm(43)
- 1.2 mm(54)
- 1.6 mm(45)
- 2.0 mm(22)
komu
Corner Chamfer
Corner Chamfer
- 0.0 mm(164)
komu
Corner Chamfer
Corner Chamfer
- 0.0 in(164)
komu
application
Coating
Coating
- TiN (8)
- Uncoated (19)
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- A30 (8)
- AS3 (12)
- CS5 (31)
- KC7140 (105)
- KC720 (86)
- KC7215 (90)
- KC7315 (6)
- KC7325 (2)
- KCMS35 (105)
- KCMS40 (81)
- KCPK10 (103)
- KCU25 (114)
- KCU40 (115)
- KD1425 (81)
- KM1 (50)
- KMF (82)
Hand Of Tool
Hand Of Tool
- R (61)
Drill Type
Drill Type
- 81-06 Spot Drill (28)
- 86-01 Indexable Drill (33)
Wiper Insert
Wiper Insert
- N (100)
Drilling Condition Material
Drilling Condition Material
- K1 (31)
- K2 (31)
- K3 (31)
- M1 (47)
- M2 (47)
- M3 (47)
- N1 (5)
- N2 (5)
- N3 (5)
- N4 (5)
- N5 (5)
- N6 (5)
- N7 (5)
- P0 (43)
- P1 (43)
- P2 (43)
- P3 (43)
- P4 (43)
- P5 (43)
- P6 (43)
- S1 (39)
- S2 (39)
- S3 (39)
- S4 (39)
frontEnd
Insert Shape
Insert Shape
- B-PARALLELOGRAM 82 (10)
- S-SQUARE 90 (144)
- W-TRIGON 80 (38)
- X-TRIGON 84 (44)
Gage Length
Gage Length
- 2.3940 in(1)
- 2.9720 in(2)
- 3.3465 in(2)
- 3.4252 in(3)
- 3.5433 in(2)
- 3.5510 in(1)
- 3.6220 in(2)
- 3.6969 in(1)
- 3.7001 in(4)
- 3.7795 in(2)
- 3.8976 in(1)
- 3.9370 in(2)
- 4.1732 in(1)
- 4.3307 in(2)
- 4.4094 in(2)
- 4.4843 in(1)
- 4.9213 in(2)
- 5.3150 in(1)
- 5.5000 in(2)
- 6.2992 in(3)
- 6.4528 in(1)
- 6.6440 in(1)
- 6.8898 in(1)
- 7.1440 in(1)
- 7.8740 in(2)
- 8.0510 in(1)
- 8.2677 in(4)
- 8.3465 in(2)
- 8.6614 in(1)
- 9.2220 in(1)
- 10.5510 in(1)
- 11.1440 in(2)
- 11.2220 in(1)
- 12.1440 in(1)
- 12.2047 in(2)
- 12.2835 in(2)
- 12.3622 in(3)
- 12.4409 in(1)
- 13.0510 in(1)
- 13.1300 in(1)
- 14.1732 in(1)
- 15.5510 in(1)
- 15.7220 in(1)
- 17.6440 in(2)
- 18.0510 in(1)
- 18.1102 in(2)
- 18.1890 in(2)
- 18.2677 in(1)
- 19.2220 in(1)
- 19.6440 in(1)
- 20.0787 in(1)
- 20.2362 in(1)
- 20.3150 in(1)
- 21.1300 in(1)
- 24.0945 in(2)
- 24.1732 in(1)
- 25.7220 in(1)
- 31.1300 in(1)
Gage Length
Gage Length
- 60.8000 mm(1)
- 75.5000 mm(2)
- 85.0000 mm(2)
- 87.0000 mm(3)
- 90.0000 mm(2)
- 90.2000 mm(1)
- 92.0000 mm(2)
- 93.9000 mm(1)
- 94.0000 mm(4)
- 96.0000 mm(2)
- 99.0000 mm(1)
- 100.0000 mm(2)
- 106.0000 mm(1)
- 110.0000 mm(2)
- 112.0000 mm(2)
- 113.9000 mm(1)
- 125.0000 mm(2)
- 135.0000 mm(1)
- 139.7000 mm(2)
- 160.0000 mm(3)
- 163.9000 mm(1)
- 168.7500 mm(1)
- 175.0000 mm(1)
- 181.4500 mm(1)
- 200.0000 mm(2)
- 204.5000 mm(1)
- 210.0000 mm(4)
- 212.0000 mm(2)
- 220.0000 mm(1)
- 234.2500 mm(1)
- 268.0000 mm(1)
- 283.0500 mm(2)
- 285.0500 mm(1)
- 308.4500 mm(1)
- 310.0000 mm(2)
- 312.0000 mm(2)
- 314.0000 mm(3)
- 316.0000 mm(1)
- 331.5000 mm(1)
- 333.5000 mm(1)
- 360.0000 mm(1)
- 395.0000 mm(1)
- 399.3500 mm(1)
- 448.1500 mm(2)
- 458.5000 mm(1)
- 460.0000 mm(2)
- 462.0000 mm(2)
- 464.0000 mm(1)
- 488.2500 mm(1)
- 498.9500 mm(1)
- 510.0000 mm(1)
- 514.0000 mm(1)
- 516.0000 mm(1)
- 536.7000 mm(1)
- 612.0000 mm(2)
- 614.0000 mm(1)
- 653.3500 mm(1)
- 790.7000 mm(1)
Point Angle
Point Angle
- 118.0 (54)
- 130.0 (2)
komu
insertGeometry
Shape
Shape
- S-SQUARE 90 (100)
Insert IC Size
Insert IC Size
- 6.35 mm(17)
- 7.75 mm(1)
- 7.925 mm(16)
- 7.95 mm(5)
- 9.525 mm(26)
- 12.7 mm(24)
- 15.725 mm(2)
- 15.875 mm(9)
komu
Insert IC Size
Insert IC Size
- 0.25 in(17)
- 0.305 in(1)
- 0.312 in(16)
- 0.313 in(5)
- 0.375 in(26)
- 0.5 in(24)
- 0.619 in(2)
- 0.625 in(9)
komu
Cutting Edge Length
Cutting Edge Length
- 6.35 mm(17)
- 7.742 mm(1)
- 7.797 mm(2)
- 7.937 mm(19)
- 9.382 mm(2)
- 9.525 mm(24)
- 12.557 mm(2)
- 12.7 mm(31)
- 15.732 mm(2)
komu
Cutting Edge Length
Cutting Edge Length
- 0.25 in(17)
- 0.3048 in(1)
- 0.307 in(2)
- 0.3125 in(19)
- 0.3694 in(2)
- 0.375 in(24)
- 0.4944 in(2)
- 0.5 in(31)
- 0.619 in(2)
komu
Chip Breaker CBMD
Chip Breaker CBMD
- 20 (33)
- 21 (30)
- 22 (4)
- 31 (12)
- HP (4)
- MD (5)
- MDT (3)
Cutting Tool Material
Cutting Tool Material
- D P (52)
- H W (164)
Tolerance Class
Tolerance Class
- G (16)
- H (12)
- P (6)
backEnd
Connection Type
Connection Type
- CYLINDRICAL (28)
- HTS SHANK (33)
System Size
System Size
- BT50 (4)
- CV50 (7)
- DV50 (2)
- HSK100A (2)
Back-End Diameter
Back-End Diameter
- 5.0 mm(1)
- 6.0 mm(1)
- 8.0 mm(7)
- 10.0 mm(7)
- 13.0 mm(9)
- 15.0 mm(3)
- 16.0 mm(5)
- 20.0 mm(3)
- 22.0 mm(6)
- 25.0 mm(3)
- 27.0 mm(6)
- 30.0 mm(3)
- 32.0 mm(13)
- 38.1 mm(2)
- 40.0 mm(10)
- 50.0 mm(37)
- 50.8 mm(19)
- 60.0 mm(3)
- 63.5 mm(3)
- 69.85 mm(13)
- 76.2 mm(3)
- 80.0 mm(2)
- 100.0 mm(2)
komu
Back-End Diameter
Back-End Diameter
- 0.1969 in(1)
- 0.2362 in(1)
- 0.315 in(7)
- 0.3937 in(7)
- 0.5118 in(9)
- 0.5906 in(3)
- 0.6299 in(5)
- 0.7874 in(3)
- 0.8661 in(6)
- 0.9843 in(3)
- 1.063 in(6)
- 1.1811 in(3)
- 1.2598 in(13)
- 1.5 in(2)
- 1.5748 in(10)
- 1.9685 in(37)
- 2.0 in(19)
- 2.3622 in(3)
- 2.5 in(3)
- 2.75 in(13)
- 3.0 in(3)
- 3.1496 in(2)
- 3.937 in(2)
komu
No filters matching ""
