Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Položka (položky) are being added to the cart
Zobrazit košík
Frézujte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

KSRM™ • Daisy IC20

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (40)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(32)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(32)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(32)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(32)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(40)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(40)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(32)
    • M Stainless Steel (40)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(40)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(40)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(40)
    • K Cast Iron (16)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(16)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(16)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(16)
    • S High-Temp Alloys (40)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(35)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(40)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(35)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(35)
    • H Hardened Materials (13)
      • H1
        Hardened Materials 44-48 HRC(13)
    Applications
    Applications
    • Face MillingFace Milling (9)
    • PocketPocket (9)
    • Pocket HelicalPocket Helical (9)
    • Pocket MillingPocket Milling (9)
    • Pocket Plunge MillingPocket Plunge Milling (1)
    • Profile MillingProfile Milling (9)
    • RampingRamping (9)
    • Shoulder Ball NoseShoulder Ball Nose (8)
    • Shoulder MillingShoulder Milling (9)
    • Shoulder RoughingShoulder Roughing (1)
    • Slot MillingSlot Milling (8)
    Cutting Diameter
    Cutting Diameter
    • 1.25 in(2)
    • 1.697 in(1)
    • 2.3661 in(1)
    • 3.153 in(1)
    • 4.1374 in(1)
    • 5.515 in(1)
    • 5.5154 in(1)
    • 7.0897 in(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 31.75 mm(2)
    • 43.1 mm(1)
    • 60.1 mm(1)
    • 80.1 mm(1)
    • 105.09 mm(1)
    • 140.09 mm(2)
    • 180.08 mm(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Length
    Cutting Length
    • 9.52 mm(1)
    • 9.525 mm(1)
    • 10.0 mm(7)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.375 in(2)
    • 0.3937 in(6)
    • 0.394 in(1)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 1.9685 in(2)
    • 2.0 in(2)
    • 2.48 in(1)
    • 2.4803 in(4)
    Reach MinkomuReach Max
    Reach
    Reach
    • 50.0 mm(2)
    • 50.8 mm(2)
    • 63.0 mm(5)
    Reach MinkomuReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (9)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (1)
    • B-Cutter Retention Screw (3)
    • C-Bolt Circle (1)
    • SHCS or RetScrw Or BoltCircle (2)
    • Weldon (2)
    Number of Flutes
    Number of Flutes
    • 3 (2)
    • 4 (1)
    • 5 (1)
    • 6 (2)
    • 7 (1)
    • 8 (1)
    • 9 (1)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.9685 in(2)
    • 2.48 in(1)
    • 2.4803 in(4)
    • 4.28 in(1)
    • 4.69 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 50.0 mm(2)
    • 63.0 mm(5)
    • 108.71 mm(1)
    • 119.126 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.375 in(13)
    • 0.394 in(17)
    • 0.5 in(10)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 9.525 mm(13)
    • 10.0 mm(17)
    • 12.7 mm(10)
    Corner Radius MinkomuCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC522M (9)
    • KC725M (18)
    • KCPK30 (14)
    • KCPM40 (14)
    • KCSM30 (11)
    • KCSM40 (17)
    Hand Of Tool
    Hand Of Tool
    • R (9)
    Wiper Insert
    Wiper Insert
    • N (31)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 0.41 (1)
    • 0.49 (1)
    • 0.5 (1)
    • 0.56 (2)
    • 0.63 (1)
    • 0.79 (1)
    • 0.8 (1)
    • 0.89 (1)
    Maximum Ramp Angle MinkomuMaximum Ramp Angle Max
    frontEnd
    Neck Diameter
    Neck Diameter
    • 1.625 in(2)
    Neck Diameter MinkomuNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 41.275 mm(1)
    • 41.28 mm(1)
    Neck Diameter MinkomuNeck Diameter Max
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • R-ROUND (31)
    Insert IC Size
    Insert IC Size
    • 19.05 mm(11)
    • 20.0 mm(10)
    • 25.4 mm(10)
    Insert IC Size MinkomuInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.75 in(11)
    • 0.787 in(10)
    • 1.0 in(10)
    Insert IC Size MinkomuInsert IC Size Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • GF (10)
    • HF (12)
    • LF (9)
    Cutting Tool Material
    Cutting Tool Material
    • H W (31)
    Tolerance Class
    Tolerance Class
    • G (31)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (2)
    • SHELL MILL (7)
    Back-End Diameter
    Back-End Diameter
    • 22.0 mm(1)
    • 27.0 mm(1)
    • 31.74 mm(1)
    • 32.0 mm(1)
    • 38.1 mm(1)
    • 40.0 mm(3)
    • 60.0 mm(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.8661 in(1)
    • 1.063 in(1)
    • 1.25 in(1)
    • 1.2598 in(1)
    • 1.5 in(1)
    • 1.5748 in(2)
    • 1.58 in(1)
    • 2.3622 in(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    other
    Insert Hand
    Insert Hand
    • N (31)
    Number of Inserts
    Number of Inserts
    • 3.0 (2)
    • 4.0 (1)
    • 5.0 (1)
    • 6.0 (2)
    • 7.0 (1)
    • 8.0 (1)
    • 9.0 (1)
    Number of Inserts MinkomuNumber of Inserts Max
    Head Length [L2]
    Head Length [L2]
    • 2.0 in(2)
    Head Length [L2] MinkomuHead Length [L2] Max
    Head Length [L2]
    Head Length [L2]
    • 50.8 mm(2)
    Head Length [L2] MinkomuHead Length [L2] Max
    Solid Indexable Tool
    Solid Indexable Tool
    No filters matching ""
    KSRM™ • Daisy IC20
    KSRM™ • Čelní frézy • RP.T2006 • Metrické
    (7)

    KSRM™ • Čelní frézy • RP.T2006 • Metrické

    KSRM™ • Daisy IC20 • RCTG2006 • End Mills • Weldon® • Inch
    (2)

    KSRM™ • Daisy IC20 • RCTG2006 • End Mills • Weldon® • Inch

    Round Inserts for Daisy KSRM™ • RCGT2006-LF
    (9)

    Round Inserts for Daisy KSRM™ • RCGT2006-LF

    Kruhové břitové destičky pro Daisy KSRM™ • RCGT2006-HF
    (12)

    Kruhové břitové destičky pro Daisy KSRM™ • RCGT2006-HF

    Kruhové břitové destičky pro Daisy KSRM™ • RC.T2006
    (10)

    Kruhové břitové destičky pro Daisy KSRM™ • RC.T2006

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    Product successfully added to project __PROJECT_NAME__
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk