Fix Perfect

Vybrat filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (15)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(15)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(15)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(15)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(15)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(15)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(15)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(15)
    • M Stainless Steel (10)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(10)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(10)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(10)
    • K Cast Iron (15)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(15)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(15)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(15)
    • N Non-Ferrous Materials (7)
      • N1
        Wrought Aluminum (7)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(7)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (7)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (7)
      • N6
        Carbon, Graphite Composites, CFRP (7)
      • N7
        MMC's (7)
    • S High-Temp Alloys (10)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(10)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(10)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(10)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(10)
    • H Hardened Materials (3)
      • H1
        Hardened Materials 44-48 HRC(3)
      • H2
        Hardened Materials 48-55 HRC(3)
      • H3
        Hardened Materials 56-60 HRC(3)
    • C CFRP Materials (7)
      • C1
        CFRP, CFRP / CFRP (7)
      • C2
        CFRP / Aluminium CFRP / Non-Ferrous (7)
    Applications
    Applications
    • FacingFacing (15)
    • Multiple Direction CuttingMultiple Direction Cutting (15)
    • ProfilingProfiling (6)
    • TurningTurning (15)
    Cutting Condition Material
    Cutting Condition Material
    • H-All (7)
    • K-All (15)
    • M-All (10)
    • N-All (7)
    • P-All (15)
    • S-All (10)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (12)
    • Lightly Interrupted Cut (15)
    • Smooth Cut (15)
    • Varying Depth of Cut (15)
    Over All Length [L]
    Over All Length [L]
    • 5.9055 in(6)
    • 6.6929 in(6)
    • 9.8425 in(3)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 150.0 mm(6)
    • 170.0 mm(6)
    • 250.0 mm(3)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.157 in(1)
    • 0.197 in(2)
    • 0.236 in(3)
    • 0.313 in(3)
    • 0.315 in(3)
    • 0.394 in(3)
    • 0.492 in(3)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 4.0 mm(1)
    • 5.0 mm(2)
    • 6.0 mm(3)
    • 7.95 mm(3)
    • 8.0 mm(3)
    • 10.0 mm(3)
    • 12.5 mm(3)
    Corner Radius MinkomuCorner Radius Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K313 (7)
    • K68 (1)
    • KC5010 (7)
    • KC5025 (3)
    • KC5410 (4)
    • KC730 (4)
    • KC850 (7)
    • KCK15 (6)
    • KCK15B (9)
    • KCK20 (3)
    • KCK20B (7)
    • KCM25 (7)
    • KCM25B (3)
    • KCP10 (5)
    • KCP10B (13)
    • KCP25 (12)
    • KCP25B (15)
    • KCP25C (15)
    • KCP30 (5)
    • KCP30B (3)
    • KCPK05 (9)
    • KCS10 (10)
    • KCS10B (7)
    • KCU10 (7)
    • KCU10B (7)
    • KCU25 (7)
    • KCU25B (4)
    • KY1615 (9)
    Hand Of Tool
    Hand Of Tool
    • L (4)
    • N (6)
    • R (5)
    F Dimension
    F Dimension
    • 16.5 mm(1)
    • 17.5 mm(1)
    • 18.5 mm(1)
    • 20.5 mm(1)
    • 26.0 mm(1)
    • 30.0 mm(1)
    • 32.0 mm(4)
    • 32.5 mm(1)
    • 40.0 mm(2)
    • 50.0 mm(2)
    F Dimension MinkomuF Dimension Max
    F Dimension
    F Dimension
    • 0.6496 in(1)
    • 0.689 in(1)
    • 0.7283 in(1)
    • 0.8071 in(1)
    • 1.0236 in(1)
    • 1.1811 in(1)
    • 1.2598 in(4)
    • 1.2795 in(1)
    • 1.5748 in(2)
    • 1.9685 in(2)
    F Dimension MinkomuF Dimension Max
    Cutting Direction
    Cutting Direction
    • B (14)
    • S (1)
    frontEnd
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.6299 in(1)
    • 0.9449 in(2)
    • 1.2598 in(1)
    • 1.2992 in(1)
    • 3.0709 in(1)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 16.0 mm(1)
    • 24.0 mm(2)
    • 32.0 mm(1)
    • 33.0 mm(1)
    • 78.0 mm(1)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    insertGeometry
    Cutting Tool Material
    Cutting Tool Material
    • C A (9)
    • H W (15)
    backEnd
    Shank Height
    Shank Height
    • 0.9843 in(6)
    • 1.2598 in(6)
    • 1.5748 in(3)
    Shank Height MinkomuShank Height Max
    Shank Height
    Shank Height
    • 25.0 mm(6)
    • 32.0 mm(6)
    • 40.0 mm(3)
    Shank Height MinkomuShank Height Max
    Shank Width
    Shank Width
    • 0.9843 in(9)
    • 1.2598 in(3)
    • 1.5748 in(3)
    Shank Width MinkomuShank Width Max
    Shank Width
    Shank Width
    • 25.0 mm(9)
    • 32.0 mm(3)
    • 40.0 mm(3)
    Shank Width MinkomuShank Width Max
    No filters matching ""
    Fix-Perfect
    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)