KM50TS™ Adapters
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (9)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(9)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(9)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(9)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(9)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(9)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(9)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(9)
- M Stainless Steel (9)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(9)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(9)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(9)
- K Cast Iron (9)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(9)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(9)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(9)
- N Non-Ferrous Materials (9)
- N7MMC's (9)
- N1Wrought Aluminum (9)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (9)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (9)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(9)
- N6Carbon, Graphite Composites, CFRP (9)
- N3High-Silicon Aluminum Alloys Si >12.2%(9)
- S High-Temp Alloys (9)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(9)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(9)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(9)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(9)
- H Hardened Materials (8)
- H1Hardened Materials 44-48 HRC(8)
- H2Hardened Materials 48-55 HRC(8)
- H4Hardened Materials >60 HRC(8)
- H3Hardened Materials 56-60 HRC(8)
Cutting Diameter
Cutting Diameter
- 0.625 in(1)
- 0.75 in(1)
- 0.8125 in(1)
- 0.875 in(1)
- 0.9375 in(1)
- 1.375 in(1)
- 1.625 in(1)
- 1.75 in(1)
- 2.0 in(1)
to
Cutting Diameter
Cutting Diameter
- 15.875 mm(1)
- 19.05 mm(1)
- 20.638 mm(1)
- 22.225 mm(1)
- 23.812 mm(1)
- 34.925 mm(1)
- 41.275 mm(1)
- 44.45 mm(1)
- 50.8 mm(1)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 47.625 mm(1)
- 57.15 mm(1)
- 61.912 mm(1)
- 66.675 mm(1)
- 71.438 mm(1)
- 104.775 mm(1)
- 123.825 mm(1)
- 133.35 mm(1)
- 152.4 mm(1)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 1.875 in(1)
- 2.25 in(1)
- 2.4375 in(1)
- 2.625 in(1)
- 2.8125 in(1)
- 4.125 in(1)
- 4.875 in(1)
- 5.25 in(1)
- 6.0 in(1)
to
Reach
Reach
- 2.5197 in(1)
- 2.9921 in(1)
- 3.189 in(1)
- 3.3858 in(1)
- 3.5433 in(1)
- 5.0787 in(1)
- 6.2205 in(1)
- 6.5748 in(1)
- 7.5197 in(1)
to
Reach
Reach
- 64.0 mm(1)
- 76.0 mm(1)
- 81.0 mm(1)
- 86.0 mm(1)
- 90.0 mm(1)
- 129.0 mm(1)
- 158.0 mm(1)
- 167.0 mm(1)
- 191.0 mm(1)
to
Connection Style
Connection Style
- KM (9)
Number of Flutes
Number of Flutes
- 2 (9)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (4)
- 3.0 (9)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 4.9068 in(1)
- 5.2818 in(1)
- 5.4693 in(1)
- 5.6568 in(1)
- 5.8433 in(1)
- 7.3698 in(1)
- 8.4959 in(1)
- 8.8709 in(1)
- 9.8179 in(1)
to
Over All Length [L]
Over All Length [L]
- 124.634 mm(1)
- 134.159 mm(1)
- 138.921 mm(1)
- 143.684 mm(1)
- 148.421 mm(1)
- 187.194 mm(1)
- 215.795 mm(1)
- 225.32 mm(1)
- 249.374 mm(1)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- CS5 (9)
- K6 (5)
- KC7140 (9)
- KC720 (9)
- KC7215 (9)
- KC7225 (9)
- KC7815 (9)
- KC7820 (4)
- KC7845 (5)
- KC7935 (9)
- KC810 (8)
- KC990 (9)
- KCMS35 (7)
- KCPK10 (9)
- KCU25 (9)
- KCU40 (9)
- KD1425 (8)
- KMF (9)
- KU40D (9)
Hand Of Tool
Hand Of Tool
- R (9)
Drill Type
Drill Type
- 86-01 Indexable Drill (9)
Drilling Condition Material
Drilling Condition Material
- K1 (9)
- K2 (9)
- K3 (9)
- M1 (9)
- M2 (9)
- M3 (9)
- N1 (9)
- N2 (9)
- N3 (9)
- N4 (9)
- N5 (9)
- N6 (9)
- N7 (9)
- P0 (9)
- P1 (9)
- P2 (9)
- P3 (9)
- P4 (9)
- P5 (9)
- P6 (9)
- S1 (9)
- S2 (9)
- S3 (9)
- S4 (9)
Front-End
Adapter Front-End
Adapter Front-End
- ER COLLET CHUCK (3)
Front End Type
Front End Type
- SZK - Collet Taper (3)
Insert Shape
Insert Shape
- X-TRIGON 84 (9)
Front End Style
Front End Style
- SZK02 Collets 8 Degree Taper (3)
Gage Length
Gage Length
- 1.9685 in(1)
- 2.3622 in(1)
- 2.7559 in(1)
Gage Length
Gage Length
- 50.0000 mm(1)
- 60.0000 mm(1)
- 70.0000 mm(1)
Back-End
Connection Type
Connection Type
- TAPER SHANK (9)
System Size
System Size
- KM50 (9)
- KM50TS (3)
Back-End Diameter
Back-End Diameter
- 50.0 mm(12)
to
Back-End Diameter
Back-End Diameter
- 1.9685 in(12)
to
Other
Solid Indexable Tool
Solid Indexable Tool
No filters matching ""
