환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

Kennametal 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기
품목 are being added to the cart
장바구니 보기

KSEM Chamfering Solutions

필터 선택
필터
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (53)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(53)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(53)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(53)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(53)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(53)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(53)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(25)
    • M Stainless Steel (53)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(53)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(53)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(53)
    • K Cast Iron (53)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(53)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(53)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(53)
    • N Non-Ferrous Materials (53)
      • N1
        Wrought Aluminum (53)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(53)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(53)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (53)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (53)
      • N6
        Carbon, Graphite Composites, CFRP (53)
      • N7
        MMC's (53)
    • S High-Temp Alloys (53)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(53)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(53)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(53)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(53)
    • H Hardened Materials (28)
      • H1
        Hardened Materials 44-48 HRC(28)
      • H2
        Hardened Materials 48-55 HRC(28)
      • H3
        Hardened Materials 56-60 HRC(28)
      • H4
        Hardened Materials >60 HRC(28)
    Applications
    Applications
    • CountersinkingCountersinking (41)
    • DrillingDrilling (41)
    Cutting Diameter
    Cutting Diameter
    • 0.4921 in(1)
    • 0.4961 in(1)
    • 0.5 in(1)
    • 0.5039 in(1)
    • 0.5091 in(1)
    • 0.5118 in(1)
    • 0.5157 in(1)
    • 0.516 in(1)
    • 0.5161 in(1)
    • 0.5197 in(1)
    • 0.5315 in(1)
    • 0.5354 in(1)
    • 0.5394 in(1)
    • 0.5433 in(1)
    • 0.547 in(1)
    • 0.5512 in(1)
    • 0.5551 in(1)
    • 0.5571 in(1)
    • 0.5591 in(1)
    • 0.5626 in(1)
    • 0.563 in(1)
    • 0.5669 in(1)
    • 0.5709 in(1)
    • 0.5748 in(1)
    • 0.578 in(1)
    • 0.5827 in(1)
    • 0.5906 in(1)
    • 0.5937 in(1)
    • 0.594 in(1)
    • 0.6024 in(1)
    • 0.609 in(1)
    • 0.6102 in(1)
    • 0.6142 in(1)
    • 0.6181 in(1)
    • 0.622 in(1)
    • 0.6299 in(1)
    • 0.6315 in(1)
    • 0.6335 in(1)
    • 0.6339 in(1)
    • 0.634 in(1)
    • 0.6358 in(1)
    • 0.6374 in(1)
    • 0.6378 in(1)
    • 0.6406 in(1)
    • 0.641 in(1)
    • 0.6496 in(1)
    • 0.6535 in(1)
    • 0.6563 in(1)
    • 0.6693 in(1)
    • 0.672 in(1)
    • 0.6831 in(1)
    • 0.6874 in(1)
    • 0.689 in(1)
    • 0.6929 in(1)
    • 0.6969 in(1)
    • 0.6988 in(1)
    • 0.7008 in(1)
    • 0.7031 in(1)
    • 0.7047 in(1)
    • 0.7087 in(1)
    • 0.7189 in(1)
    • 0.719 in(1)
    • 0.7205 in(1)
    • 0.7283 in(1)
    • 0.7323 in(1)
    • 0.734 in(1)
    • 0.7402 in(1)
    • 0.7441 in(1)
    • 0.748 in(1)
    • 0.75 in(1)
    • 0.7559 in(1)
    • 0.757 in(1)
    • 0.7571 in(1)
    • 0.7579 in(1)
    • 0.7587 in(1)
    • 0.759 in(1)
    • 0.7606 in(1)
    • 0.7618 in(1)
    • 0.7657 in(1)
    • 0.766 in(1)
    • 0.7677 in(1)
    • 0.7736 in(1)
    • 0.7756 in(1)
    • 0.781 in(1)
    • 0.7811 in(1)
    • 0.7874 in(1)
    • 0.7913 in(1)
    • 0.7969 in(1)
    • 0.797 in(1)
    • 0.8012 in(1)
    • 0.8071 in(1)
    • 0.8126 in(1)
    • 0.815 in(1)
    • 0.8268 in(1)
    • 0.8307 in(1)
    • 0.8327 in(1)
    • 0.8346 in(1)
    • 0.8398 in(1)
    • 0.8437 in(1)
    • 0.844 in(1)
    • 0.846 in(1)
    • 0.8465 in(1)
    • 0.8543 in(1)
    • 0.859 in(1)
    • 0.8594 in(1)
    • 0.8661 in(1)
    • 0.8701 in(1)
    • 0.872 in(1)
    • 0.875 in(1)
    • 0.8752 in(1)
    • 0.8835 in(1)
    • 0.884 in(1)
    • 0.8858 in(1)
    • 0.8906 in(1)
    • 0.8965 in(1)
    • 0.9055 in(1)
    • 0.9075 in(1)
    • 0.9094 in(1)
    • 0.9154 in(1)
    • 0.9173 in(1)
    • 0.922 in(1)
    • 0.9252 in(1)
    • 0.9331 in(1)
    • 0.9374 in(1)
    • 0.9375 in(1)
    • 0.9449 in(1)
    • 0.9567 in(1)
    • 0.9646 in(1)
    • 0.9689 in(1)
    • 0.969 in(1)
    • 0.9724 in(1)
    • 0.9843 in(1)
    • 0.987 in(1)
    • 0.9941 in(1)
    • 0.9961 in(1)
    • 1.0 in(1)
    • 1.0039 in(1)
    • 1.0079 in(1)
    • 1.0098 in(1)
    • 1.0106 in(1)
    • 1.0126 in(1)
    • 1.0142 in(1)
    • 1.0161 in(1)
    • 1.0236 in(1)
    • 1.031 in(1)
    • 1.0311 in(1)
    • 1.0354 in(1)
    • 1.0433 in(1)
    • 1.0445 in(1)
    • 1.047 in(1)
    • 1.0512 in(1)
    • 1.063 in(1)
    • 1.0827 in(1)
    • 1.094 in(1)
    • 1.1024 in(1)
    • 1.1063 in(1)
    • 1.109 in(1)
    • 1.1161 in(1)
    • 1.122 in(1)
    • 1.125 in(1)
    • 1.1252 in(1)
    • 1.1417 in(1)
    • 1.1563 in(1)
    • 1.1614 in(1)
    • 1.1705 in(1)
    • 1.172 in(1)
    • 1.1811 in(1)
    • 1.1875 in(1)
    • 1.2008 in(1)
    • 1.203 in(1)
    • 1.219 in(1)
    • 1.2205 in(1)
    • 1.2264 in(1)
    • 1.2402 in(1)
    • 1.25 in(1)
    • 1.2598 in(1)
    • 1.2677 in(1)
    • 1.2732 in(1)
    • 1.2795 in(1)
    • 1.281 in(1)
    • 1.2811 in(1)
    • 1.297 in(1)
    • 1.2992 in(1)
    • 1.313 in(1)
    • 1.3189 in(1)
    • 1.328 in(1)
    • 1.3386 in(1)
    • 1.344 in(1)
    • 1.3583 in(1)
    • 1.375 in(1)
    • 1.378 in(1)
    • 1.3976 in(1)
    • 1.406 in(1)
    • 1.4173 in(1)
    • 1.422 in(1)
    • 1.437 in(1)
    • 1.4374 in(1)
    • 1.4375 in(1)
    • 1.4567 in(1)
    • 1.469 in(1)
    • 1.4764 in(1)
    • 1.4961 in(1)
    • 1.5 in(1)
    • 1.514 in(1)
    • 1.5142 in(1)
    • 1.5157 in(1)
    • 1.5354 in(1)
    • 1.5433 in(1)
    • 1.5551 in(1)
    • 1.565 in(1)
    • 1.5748 in(1)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 12.5 mm(1)
    • 12.6 mm(1)
    • 12.7 mm(1)
    • 12.8 mm(1)
    • 12.93 mm(1)
    • 13.0 mm(1)
    • 13.1 mm(1)
    • 13.11 mm(1)
    • 13.2 mm(1)
    • 13.5 mm(1)
    • 13.6 mm(1)
    • 13.7 mm(1)
    • 13.8 mm(1)
    • 13.89 mm(1)
    • 14.0 mm(1)
    • 14.1 mm(1)
    • 14.15 mm(1)
    • 14.2 mm(1)
    • 14.29 mm(1)
    • 14.4 mm(1)
    • 14.5 mm(1)
    • 14.6 mm(1)
    • 14.68 mm(1)
    • 14.8 mm(1)
    • 15.0 mm(1)
    • 15.08 mm(1)
    • 15.3 mm(1)
    • 15.48 mm(1)
    • 15.5 mm(1)
    • 15.6 mm(1)
    • 15.7 mm(1)
    • 15.8 mm(1)
    • 16.0 mm(1)
    • 16.04 mm(1)
    • 16.09 mm(1)
    • 16.1 mm(1)
    • 16.15 mm(1)
    • 16.19 mm(1)
    • 16.2 mm(1)
    • 16.27 mm(1)
    • 16.5 mm(1)
    • 16.6 mm(1)
    • 16.67 mm(1)
    • 17.0 mm(1)
    • 17.07 mm(1)
    • 17.35 mm(1)
    • 17.46 mm(1)
    • 17.5 mm(1)
    • 17.6 mm(1)
    • 17.7 mm(1)
    • 17.75 mm(1)
    • 17.8 mm(1)
    • 17.86 mm(1)
    • 17.9 mm(1)
    • 18.0 mm(1)
    • 18.26 mm(1)
    • 18.3 mm(1)
    • 18.5 mm(1)
    • 18.6 mm(1)
    • 18.65 mm(1)
    • 18.8 mm(1)
    • 18.9 mm(1)
    • 19.0 mm(1)
    • 19.05 mm(1)
    • 19.2 mm(1)
    • 19.228 mm(1)
    • 19.23 mm(1)
    • 19.25 mm(1)
    • 19.27 mm(1)
    • 19.32 mm(1)
    • 19.35 mm(1)
    • 19.45 mm(1)
    • 19.5 mm(1)
    • 19.65 mm(1)
    • 19.7 mm(1)
    • 19.84 mm(1)
    • 20.0 mm(1)
    • 20.1 mm(1)
    • 20.24 mm(1)
    • 20.243 mm(1)
    • 20.35 mm(1)
    • 20.5 mm(1)
    • 20.64 mm(1)
    • 20.7 mm(1)
    • 21.0 mm(1)
    • 21.1 mm(1)
    • 21.15 mm(1)
    • 21.2 mm(1)
    • 21.33 mm(1)
    • 21.43 mm(1)
    • 21.5 mm(1)
    • 21.7 mm(1)
    • 21.83 mm(1)
    • 22.0 mm(1)
    • 22.1 mm(1)
    • 22.15 mm(1)
    • 22.23 mm(1)
    • 22.44 mm(1)
    • 22.5 mm(1)
    • 22.62 mm(1)
    • 22.77 mm(1)
    • 23.0 mm(1)
    • 23.05 mm(1)
    • 23.1 mm(1)
    • 23.25 mm(1)
    • 23.3 mm(1)
    • 23.42 mm(1)
    • 23.5 mm(1)
    • 23.7 mm(1)
    • 23.81 mm(1)
    • 24.0 mm(1)
    • 24.3 mm(1)
    • 24.5 mm(1)
    • 24.61 mm(1)
    • 24.7 mm(1)
    • 25.0 mm(1)
    • 25.07 mm(1)
    • 25.25 mm(1)
    • 25.3 mm(1)
    • 25.4 mm(1)
    • 25.5 mm(1)
    • 25.6 mm(1)
    • 25.65 mm(1)
    • 25.67 mm(1)
    • 25.72 mm(1)
    • 25.76 mm(1)
    • 25.81 mm(1)
    • 26.0 mm(1)
    • 26.19 mm(1)
    • 26.3 mm(1)
    • 26.5 mm(1)
    • 26.53 mm(1)
    • 26.59 mm(1)
    • 26.7 mm(1)
    • 27.0 mm(1)
    • 27.5 mm(1)
    • 27.78 mm(1)
    • 28.0 mm(1)
    • 28.1 mm(1)
    • 28.18 mm(1)
    • 28.35 mm(1)
    • 28.5 mm(1)
    • 28.58 mm(1)
    • 29.0 mm(1)
    • 29.37 mm(1)
    • 29.5 mm(1)
    • 29.73 mm(1)
    • 29.77 mm(1)
    • 30.0 mm(1)
    • 30.16 mm(1)
    • 30.5 mm(1)
    • 30.56 mm(1)
    • 30.96 mm(1)
    • 31.0 mm(1)
    • 31.15 mm(1)
    • 31.5 mm(1)
    • 31.75 mm(1)
    • 32.0 mm(1)
    • 32.2 mm(1)
    • 32.34 mm(1)
    • 32.5 mm(1)
    • 32.54 mm(1)
    • 32.94 mm(1)
    • 33.0 mm(1)
    • 33.34 mm(1)
    • 33.4 mm(1)
    • 33.5 mm(1)
    • 33.73 mm(1)
    • 34.0 mm(1)
    • 34.13 mm(1)
    • 34.5 mm(1)
    • 34.93 mm(1)
    • 35.0 mm(1)
    • 35.5 mm(1)
    • 35.72 mm(1)
    • 36.0 mm(1)
    • 36.12 mm(1)
    • 36.5 mm(1)
    • 36.51 mm(1)
    • 37.0 mm(1)
    • 37.31 mm(1)
    • 37.5 mm(1)
    • 38.0 mm(1)
    • 38.1 mm(1)
    • 38.46 mm(1)
    • 38.5 mm(1)
    • 39.0 mm(1)
    • 39.2 mm(1)
    • 39.5 mm(1)
    • 39.75 mm(1)
    • 40.0 mm(1)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 14.5 mm(1)
    • 15.8 mm(1)
    • 18.0 mm(1)
    • 18.198 mm(1)
    • 19.84 mm(1)
    • 22.0 mm(1)
    • 24.0 mm(1)
    • 26.0 mm(1)
    • 28.0 mm(1)
    • 30.0 mm(1)
    • 32.0 mm(1)
    • 36.0 mm(1)
    • 40.0 mm(1)
    Maximum Hole Depth [L4] Min받는 사람Maximum Hole Depth [L4] Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 0.5709 in(1)
    • 0.622 in(1)
    • 0.7087 in(1)
    • 0.7165 in(1)
    • 0.7811 in(1)
    • 0.8661 in(1)
    • 0.9449 in(1)
    • 1.0236 in(1)
    • 1.1024 in(1)
    • 1.1811 in(1)
    • 1.2598 in(1)
    • 1.4173 in(1)
    • 1.5748 in(1)
    Maximum Hole Depth [L4] Min받는 사람Maximum Hole Depth [L4] Max
    Connection Style
    Connection Style
    • KSEM Chamfer Ring Connection (28)
    • Whistle Drive 2 (2)
    • Whistle Notch 2 (11)
    Number of Flutes
    Number of Flutes
    • 2 (41)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 0.0 (41)
    • 3.0 (25)
    Cutting Edges Per Insert Min받는 사람Cutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.5748 in(7)
    • 1.6535 in(8)
    • 1.8898 in(5)
    • 1.9685 in(4)
    • 2.126 in(3)
    • 2.2047 in(1)
    • 4.2197 in(1)
    • 4.2204 in(1)
    • 4.3047 in(1)
    • 4.3146 in(1)
    • 4.6421 in(1)
    • 4.7335 in(1)
    • 4.8248 in(1)
    • 5.074 in(1)
    • 5.1654 in(1)
    • 5.2567 in(1)
    • 5.3484 in(1)
    • 6.1091 in(1)
    • 6.4886 in(1)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(7)
    • 42.0 mm(8)
    • 48.0 mm(5)
    • 50.0 mm(4)
    • 54.0 mm(3)
    • 56.0 mm(1)
    • 107.18 mm(1)
    • 107.198 mm(1)
    • 109.34 mm(1)
    • 109.59 mm(1)
    • 117.91 mm(1)
    • 120.23 mm(1)
    • 122.55 mm(1)
    • 128.88 mm(1)
    • 131.2 mm(1)
    • 133.52 mm(1)
    • 135.85 mm(1)
    • 155.17 mm(1)
    • 164.81 mm(1)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.008 in(12)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.2 mm(12)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(12)
    Corner Chamfer Min받는 사람Corner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(12)
    Corner Chamfer Min받는 사람Corner Chamfer Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • CS5 (28)
    • KC7015 (45)
    • KC7135 (13)
    • KC7140 (17)
    • KC7215 (28)
    • KC7315 (45)
    • KC7410 (13)
    • KCMS15 (13)
    • KCMS35 (13)
    • KCPM45 (13)
    • KMF (28)
    Hand Of Tool
    Hand Of Tool
    • R (41)
    Drill Type
    Drill Type
    • 86-02 Indexable Step Drill (11)
    • 86-04 Indexable Counterbore (28)
    • 86-10 Indexable Step Drill (2)
    Wiper Insert
    Wiper Insert
    • N (12)
    Countersunk Angle
    Countersunk Angle
    • 41.0 (28)
    • 45.0 (28)
    Countersunk Angle Min받는 사람Countersunk Angle Max
    frontEnd
    Insert Shape
    Insert Shape
    • COUNTERBORE/COUNTERSINK MISC (28)
    • KSEM DRILL (13)
    • T-TRIANGLE 60 (25)
    Point Angle
    Point Angle
    • 140.0 (13)
    • 150.0 (13)
    • 180.0 (13)
    Point Angle Min받는 사람Point Angle Max
    insertGeometry
    Shape
    Shape
    • T-TRIANGLE 60 (12)
    Insert IC Size
    Insert IC Size
    • 5.56 mm(3)
    • 6.35 mm(3)
    • 7.94 mm(3)
    • 9.52 mm(3)
    Insert IC Size Min받는 사람Insert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.2188 in(3)
    • 0.25 in(3)
    • 0.3125 in(3)
    • 0.375 in(3)
    Insert IC Size Min받는 사람Insert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 9.63 mm(3)
    • 11.0 mm(3)
    • 13.75 mm(3)
    • 16.5 mm(3)
    Cutting Edge Length Min받는 사람Cutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.3791 in(3)
    • 0.4331 in(3)
    • 0.5413 in(3)
    • 0.65 in(3)
    Cutting Edge Length Min받는 사람Cutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • GD (12)
    Cutting Tool Material
    Cutting Tool Material
    • H W (12)
    Tolerance Class
    Tolerance Class
    • G (12)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (41)
    Back-End Diameter
    Back-End Diameter
    • 12.5 mm(1)
    • 13.0 mm(1)
    • 13.5 mm(1)
    • 14.0 mm(1)
    • 14.5 mm(1)
    • 15.0 mm(1)
    • 15.5 mm(1)
    • 16.0 mm(3)
    • 16.5 mm(1)
    • 17.0 mm(1)
    • 17.5 mm(1)
    • 18.0 mm(1)
    • 18.5 mm(1)
    • 19.0 mm(1)
    • 19.5 mm(1)
    • 20.0 mm(3)
    • 20.5 mm(1)
    • 21.0 mm(1)
    • 21.5 mm(1)
    • 22.0 mm(1)
    • 22.5 mm(1)
    • 23.0 mm(1)
    • 23.5 mm(1)
    • 24.0 mm(1)
    • 24.5 mm(1)
    • 25.0 mm(4)
    • 26.0 mm(1)
    • 26.5 mm(1)
    • 32.0 mm(4)
    • 50.0 mm(2)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.4921 in(1)
    • 0.5118 in(1)
    • 0.5315 in(1)
    • 0.5512 in(1)
    • 0.5709 in(1)
    • 0.5906 in(1)
    • 0.6102 in(1)
    • 0.6299 in(3)
    • 0.6496 in(1)
    • 0.6693 in(1)
    • 0.689 in(1)
    • 0.7087 in(1)
    • 0.7283 in(1)
    • 0.748 in(1)
    • 0.7677 in(1)
    • 0.7874 in(3)
    • 0.8071 in(1)
    • 0.8268 in(1)
    • 0.8465 in(1)
    • 0.8661 in(1)
    • 0.8858 in(1)
    • 0.9055 in(1)
    • 0.9252 in(1)
    • 0.9449 in(1)
    • 0.9646 in(1)
    • 0.9843 in(4)
    • 1.0236 in(1)
    • 1.0433 in(1)
    • 1.2598 in(4)
    • 1.9685 in(2)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    other
    Insert Hand
    Insert Hand
    • N (12)
    Solid Indexable Tool
    Solid Indexable Tool
    No filters matching ""
    KSEM Chamfering Solutions
    KSEM™ • 45° 챔퍼가 있는 드릴 바디 • 1 x D • WD 섕크 • Metric
    (2)

    KSEM™ • 45° 챔퍼가 있는 드릴 바디 • 1 x D • WD 섕크 • Metric

    KSEM™ • 챔퍼 인서트 • TPGX-GD 형상
    (12)

    KSEM™ • 챔퍼 인서트 • TPGX-GD 형상

    KSEM™ • 챔퍼 링 • Metric
    (28)

    KSEM™ • 챔퍼 링 • Metric

    KSEM™ • 45° 챔퍼가 있는 드릴 바디 • 1 x D • WN 섕크 • Metric
    (11)

    KSEM™ • 45° 챔퍼가 있는 드릴 바디 • 1 x D • WN 섕크 • Metric

    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    Select the destination where you want to move 받는 사람.
    신제품 Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    유효한 이름을 입력하십시오.
    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.
    장바구니 보기

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO 카탈로그 번호 등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk