환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

Kennametal 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기
품목 are being added to the cart
장바구니 보기

Ceramic Mills

필터 선택
필터
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (45)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(45)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(45)
    • K Cast Iron (10)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(10)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(10)
    • N Non-Ferrous Materials (1)
      • N1
        Wrought Aluminum (1)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (1)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1)
      • N7
        MMC's (1)
    • S High-Temp Alloys (71)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(71)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(71)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(71)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1)
    • H Hardened Materials (7)
      • H1
        Hardened Materials 44-48 HRC(7)
      • H2
        Hardened Materials 48-55 HRC(1)
      • H3
        Hardened Materials 56-60 HRC(1)
    • C CFRP Materials (1)
      • C2
        CFRP / Aluminium CFRP / Non-Ferrous (1)
    Applications
    Applications
    • Face MillingFace Milling (46)
    • PocketPocket (23)
    • Pocket MillingPocket Milling (23)
    • Profile MillingProfile Milling (32)
    • RampingRamping (23)
    • Shoulder Ball NoseShoulder Ball Nose (27)
    • Shoulder MillingShoulder Milling (33)
    • Shoulder RoughingShoulder Roughing (20)
    • Slot Ball NoseSlot Ball Nose (19)
    • Slot MillingSlot Milling (33)
    Cutting Diameter
    Cutting Diameter
    • 0.375 in(1)
    • 0.3799 in(1)
    • 0.412 in(1)
    • 0.4134 in(1)
    • 0.5 in(1)
    • 0.537 in(1)
    • 0.5374 in(1)
    • 0.61 in(1)
    • 0.6102 in(1)
    • 0.625 in(2)
    • 0.75 in(1)
    • 0.761 in(2)
    • 0.766 in(1)
    • 0.77 in(1)
    • 1.0 in(1)
    • 1.009 in(1)
    • 1.0748 in(2)
    • 1.081 in(1)
    • 1.4685 in(3)
    • 1.473 in(1)
    • 1.5 in(2)
    • 1.501 in(1)
    • 1.505 in(1)
    • 1.9803 in(3)
    • 2.0 in(3)
    • 2.003 in(1)
    • 2.499 in(1)
    • 2.5 in(2)
    • 2.501 in(1)
    • 2.6496 in(2)
    • 2.652 in(1)
    • 3.437 in(1)
    • 3.498 in(1)
    • 4.4213 in(1)
    • 5.7992 in(1)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 9.525 mm(1)
    • 9.65 mm(1)
    • 10.5 mm(2)
    • 12.7 mm(1)
    • 13.65 mm(2)
    • 15.5 mm(2)
    • 15.875 mm(1)
    • 15.9 mm(1)
    • 19.05 mm(1)
    • 19.329 mm(2)
    • 19.46 mm(1)
    • 19.57 mm(1)
    • 25.4 mm(1)
    • 25.64 mm(1)
    • 27.3 mm(2)
    • 27.45 mm(1)
    • 37.3 mm(3)
    • 37.417 mm(1)
    • 38.1 mm(2)
    • 38.12 mm(1)
    • 38.22 mm(1)
    • 50.3 mm(3)
    • 50.79 mm(1)
    • 50.8 mm(2)
    • 50.87 mm(1)
    • 63.47 mm(1)
    • 63.5 mm(2)
    • 63.531 mm(1)
    • 67.3 mm(2)
    • 67.364 mm(1)
    • 87.3 mm(1)
    • 88.85 mm(1)
    • 112.3 mm(1)
    • 147.3 mm(1)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 3.175 mm(2)
    • 3.18 mm(3)
    • 4.75 mm(4)
    • 4.76 mm(2)
    • 6.0 mm(6)
    • 6.32 mm(4)
    • 6.326 mm(6)
    • 6.33 mm(5)
    • 6.35 mm(15)
    Cutting Length Min받는 사람Cutting Length Max
    Cutting Length
    Cutting Length
    • 0.125 in(5)
    • 0.187 in(4)
    • 0.1875 in(2)
    • 0.249 in(21)
    • 0.25 in(15)
    Cutting Length Min받는 사람Cutting Length Max
    Cutting Condition Material
    Cutting Condition Material
    • H-All (1)
    Cutting Condition
    Cutting Condition
    • Smooth Cut (1)
    Reach
    Reach
    • 0.9335 in(1)
    • 0.9436 in(1)
    • 1.0209 in(1)
    • 1.0236 in(1)
    • 1.181 in(2)
    • 1.1921 in(1)
    • 1.2205 in(2)
    • 1.25 in(1)
    • 1.378 in(1)
    • 1.5 in(1)
    • 1.5354 in(1)
    • 1.5559 in(1)
    • 1.61 in(1)
    • 1.75 in(4)
    • 1.7717 in(5)
    • 1.772 in(1)
    • 1.929 in(1)
    • 1.9685 in(8)
    • 2.0 in(9)
    • 2.48 in(2)
    • 3.11 in(1)
    • 3.5 in(1)
    Reach Min받는 사람Reach Max
    Reach
    Reach
    • 23.711 mm(1)
    • 23.969 mm(1)
    • 25.93 mm(1)
    • 26.0 mm(1)
    • 30.0 mm(2)
    • 30.28 mm(1)
    • 31.0 mm(2)
    • 31.75 mm(1)
    • 35.0 mm(1)
    • 38.1 mm(1)
    • 39.0 mm(1)
    • 39.52 mm(1)
    • 40.9 mm(1)
    • 44.45 mm(4)
    • 45.0 mm(6)
    • 49.0 mm(1)
    • 50.0 mm(8)
    • 50.8 mm(9)
    • 63.0 mm(2)
    • 79.0 mm(1)
    • 88.9 mm(1)
    Reach Min받는 사람Reach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (47)
    Tool Cutting Edge Angle Min받는 사람Tool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (22)
    • B-Cutter Retention Screw (5)
    • Screw-On Connection (6)
    • Straight-Cylindrical (14)
    Number of Flutes
    Number of Flutes
    • 11 (1)
    • 2 (4)
    • 3 (17)
    • 4 (9)
    • 5 (4)
    • 6 (6)
    • 7 (1)
    • 8 (2)
    • 9 (3)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (35)
    • 2.0 (37)
    Cutting Edges Per Insert Min받는 사람Cutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.75 in(4)
    • 1.7717 in(5)
    • 1.9685 in(9)
    • 2.0 in(9)
    • 2.1161 in(1)
    • 2.2441 in(1)
    • 2.4646 in(1)
    • 2.48 in(2)
    • 2.7362 in(1)
    • 2.95 in(1)
    • 2.953 in(1)
    • 3.2 in(1)
    • 3.228 in(2)
    • 3.78 in(1)
    • 3.8 in(1)
    • 4.0 in(2)
    • 4.3307 in(2)
    • 4.331 in(1)
    • 5.5 in(2)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 44.45 mm(4)
    • 45.0 mm(5)
    • 50.0 mm(9)
    • 50.8 mm(9)
    • 53.75 mm(1)
    • 57.0 mm(1)
    • 62.6 mm(1)
    • 63.0 mm(2)
    • 69.5 mm(1)
    • 74.93 mm(1)
    • 75.0 mm(1)
    • 81.28 mm(1)
    • 82.0 mm(2)
    • 96.0 mm(1)
    • 96.52 mm(1)
    • 101.6 mm(2)
    • 110.0 mm(3)
    • 139.7 mm(2)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.125 in(7)
    • 0.188 in(11)
    • 0.25 in(54)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Radius
    Corner Radius
    • 3.175 mm(7)
    • 4.775 mm(11)
    • 6.35 mm(54)
    Corner Radius Min받는 사람Corner Radius Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K313 (1)
    • KY1540 (26)
    • KY3500 (10)
    • KY4300 (13)
    • KY4400 (1)
    • KYHS10 (6)
    • KYS25 (12)
    • KYS30 (56)
    • KYSP30 (42)
    Hand Of Tool
    Hand Of Tool
    • R (47)
    Wiper Insert
    Wiper Insert
    • N (25)
    Drilling Condition Material
    Drilling Condition Material
    • H-All (1)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 1.0 (1)
    • 1.95 (1)
    • 2.0 (2)
    • 2.5 (1)
    • 2.87 (1)
    • 3.0 (2)
    • 4.2 (1)
    • 4.233 (1)
    • 4.25 (2)
    • 8.0 (4)
    • 10.0 (3)
    • 12.0 (1)
    • 13.0 (2)
    • 14.0 (1)
    Maximum Ramp Angle Min받는 사람Maximum Ramp Angle Max
    frontEnd
    Neck Diameter
    Neck Diameter
    • 0.5512 in(1)
    • 0.6693 in(1)
    • 0.7087 in(1)
    • 0.709 in(1)
    • 0.9055 in(1)
    • 0.9213 in(1)
    • 1.196 in(1)
    • 1.22 in(1)
    Neck Diameter Min받는 사람Neck Diameter Max
    Neck Diameter
    Neck Diameter
    • 14.0 mm(1)
    • 17.0 mm(1)
    • 18.0 mm(2)
    • 23.0 mm(1)
    • 23.4 mm(1)
    • 30.386 mm(1)
    • 31.0 mm(1)
    Neck Diameter Min받는 사람Neck Diameter Max
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • R-ROUND (25)
    Insert IC Size
    Insert IC Size
    • 6.35 mm(2)
    • 9.525 mm(5)
    • 12.7 mm(18)
    Insert IC Size Min받는 사람Insert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.25 in(2)
    • 0.375 in(5)
    • 0.5 in(18)
    Insert IC Size Min받는 사람Insert IC Size Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • GN (4)
    Cutting Tool Material
    Cutting Tool Material
    • C A (4)
    • C N (20)
    • H W (1)
    Tolerance Class
    Tolerance Class
    • G (25)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (14)
    • SCREW-ON (6)
    • SHELL MILL (27)
    Back-End Diameter
    Back-End Diameter
    • 15.875 mm(1)
    • 16.0 mm(3)
    • 18.0 mm(2)
    • 19.05 mm(9)
    • 20.0 mm(2)
    • 21.0 mm(2)
    • 22.0 mm(6)
    • 25.0 mm(1)
    • 25.4 mm(5)
    • 27.0 mm(3)
    • 29.0 mm(2)
    • 31.74 mm(1)
    • 31.75 mm(3)
    • 32.0 mm(4)
    • 38.1 mm(1)
    • 40.0 mm(2)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.625 in(1)
    • 0.6299 in(3)
    • 0.7087 in(2)
    • 0.75 in(9)
    • 0.7874 in(2)
    • 0.8268 in(2)
    • 0.8661 in(1)
    • 0.8666 in(5)
    • 0.9843 in(1)
    • 1.0 in(5)
    • 1.063 in(2)
    • 1.0634 in(1)
    • 1.14 in(1)
    • 1.1417 in(1)
    • 1.25 in(4)
    • 1.2598 in(2)
    • 1.26 in(2)
    • 1.5 in(1)
    • 1.5748 in(2)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    other
    Insert Hand
    Insert Hand
    • N (25)
    Number of Inserts
    Number of Inserts
    • 2.0 (4)
    • 3.0 (17)
    • 4.0 (9)
    • 5.0 (4)
    • 6.0 (6)
    • 7.0 (1)
    • 8.0 (2)
    • 9.0 (3)
    • 11.0 (1)
    Number of Inserts Min받는 사람Number of Inserts Max
    Head Length [L2]
    Head Length [L2]
    • 0.9335 in(1)
    • 0.9436 in(1)
    • 1.0209 in(1)
    • 1.0236 in(1)
    • 1.181 in(2)
    • 1.1921 in(1)
    • 1.2205 in(2)
    • 1.25 in(1)
    • 1.378 in(1)
    • 1.5 in(1)
    • 1.5354 in(1)
    • 1.5559 in(1)
    • 1.61 in(1)
    • 1.772 in(1)
    • 1.929 in(1)
    • 1.9685 in(1)
    • 3.11 in(1)
    • 3.5 in(1)
    Head Length [L2] Min받는 사람Head Length [L2] Max
    Head Length [L2]
    Head Length [L2]
    • 23.711 mm(1)
    • 23.969 mm(1)
    • 25.93 mm(1)
    • 26.0 mm(1)
    • 30.0 mm(2)
    • 30.28 mm(1)
    • 31.0 mm(2)
    • 31.75 mm(1)
    • 35.0 mm(1)
    • 38.1 mm(1)
    • 39.0 mm(1)
    • 39.52 mm(1)
    • 40.9 mm(1)
    • 45.0 mm(1)
    • 49.0 mm(1)
    • 50.0 mm(1)
    • 79.0 mm(1)
    • 88.9 mm(1)
    Head Length [L2] Min받는 사람Head Length [L2] Max
    Solid Indexable Tool
    Solid Indexable Tool
    No filters matching ""
    Ceramic Mills
    Ceramic Mills • RN
    (37)

    Ceramic Mills • RN

    Ceramic Mills • RP
    (35)

    Ceramic Mills • RP

    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    Select the destination where you want to move 받는 사람.
    신제품 Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    유효한 이름을 입력하십시오.
    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.
    장바구니 보기

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO 카탈로그 번호 등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk